Production

Our products

Push-Fitting

Brass Faucet Bodies

Brass Faucet Bodies

Brass Nuts

Brass Nuts

Brass Fittings

Brass Fittings

Copper Parts

Copper Parts

Brass Screws

Chemical Brass Fittings

Chemical-Nickel Plated Brass Fittings

Inox Fittings

Inox Fittings

Medical components

Medical Components

Brass hose elbows

Brass Hose Elbows

Brass Spindles

Brass Spindles

Turned and chuck parts

We manufacture precision turned parts in small, medium and large production runs for all branches of industry. The ranges of producible dimensions are as follows:

LONG TURNED PARTS

ø 3 - 38 mm

Length up to 1200 mm

SHORT TURNED PARTS

ø 10 - 65 mm

Length up to 350 mm

CHUCK PARTS

Up to ø 250 mm

Materials

We manufacture complicated and simple turned parts mainly from:

Copper Alloys: Cu-ETP CW004A, Cu-TeP CW118C, Cu-DLP CW023A, Cu-DHP CW024A

 

Red Brass + Bronze Alloys: G-CuSn5Zn5Pb5 CC491K (RG5), G-CuSn7Zn4Pb7 CC493K (RG7), CuSn8 CW453K, CuSn8P CW459K

 

Stainless Steel Alloys: AISI 303 1.4305, AISI 304L 1.4307, AISI 316L 1.4404, AISI 430F 1.4104

 

Steel Alloys: 11SMnPb30 1.0718, 11SMn30+C 1.0715, 11SMn37 1.0736, 11SMnPb37 1.0737, 36SMnPb14 1.0765

 

Aluminum Alloys: EN AW-2007 | 3.1645 | AlCuMgPb, EN AW-6060 | 3.3206 | AlMgSi0, 5, EN AW-6061 | 3.3211 | AlMg1SiCu

 

 

Lehisa offers its customers from the sanitary industry products that fully meets the specification of the EC Drinking Water Directive (98/83/EC). Moreover, this hygenic suited copper alloy material for use in drinking water applications meets the recommendations of the German Federal Environmental Agency (4 MS List, status January 2015) and of the Drinking Water Ordinance as per DIN 50930-6 (2013).

Other materials on request

Material inspection certificates are available for all materials. The relevant documents are stored in our DMS.

Sectors

We provide services to a wide variety of industries including:

Plumbing and Sanitary

Home Appliances

Fire Protection

HVAC (Heating, Ventilation, and Air Conditioning)

Automotive

Agricultural

Fitting and Valves

Food and Beverage

Medical

Electrical and Electronics

Gas

Aerospace

Treatments and finishes

We offer finishing and heat treatment as part of our service.

Surface treatment

  • Electroless nickel plating
  • Chemical nickel plating
  • Silver plating
  • Copper plating
  • Tin plating
  • Anodization
  • Passivation
  • Galvanization
Heat treatment

  • Stress relieving
  • Annealing

Drum or rack plating capabilities for larger and delicate parts are possible.
Lead and cadmium free plating services that meet RoHS, ELV, and WEEE requirements.

Surface treatments and heat treatments are carried out by our long-term reliable partners subjected to our own quality system.