Production
Brass Faucet Bodies
Brass Nuts
Brass Fittings
Copper Parts
Brass Screws
Chemical-Nickel Plated Brass Fittings
Inox Fittings
Medical Components
Brass Hose Elbows
Brass Spindles
Turned and chuck parts
We manufacture precision turned parts in small, medium and large production runs for all branches of industry. The ranges of producible dimensions are as follows:
LONG TURNED PARTS
ø 3 - 38 mm
Length up to 1200 mm
SHORT TURNED PARTS
ø 10 - 65 mm
Length up to 350 mm
CHUCK PARTS
Up to ø 250 mm
Materials
We manufacture complicated and simple turned parts mainly from:
Copper Alloys: Cu-ETP CW004A, Cu-TeP CW118C, Cu-DLP CW023A, Cu-DHP CW024A
Red Brass + Bronze Alloys: G-CuSn5Zn5Pb5 CC491K (RG5), G-CuSn7Zn4Pb7 CC493K (RG7), CuSn8 CW453K, CuSn8P CW459K
Stainless Steel Alloys: AISI 303 1.4305, AISI 304L 1.4307, AISI 316L 1.4404, AISI 430F 1.4104
Steel Alloys: 11SMnPb30 1.0718, 11SMn30+C 1.0715, 11SMn37 1.0736, 11SMnPb37 1.0737, 36SMnPb14 1.0765
Aluminum Alloys: EN AW-2007 | 3.1645 | AlCuMgPb, EN AW-6060 | 3.3206 | AlMgSi0, 5, EN AW-6061 | 3.3211 | AlMg1SiCu
Lehisa offers its customers from the sanitary industry products that fully meets the specification of the EC Drinking Water Directive (98/83/EC). Moreover, this hygenic suited copper alloy material for use in drinking water applications meets the recommendations of the German Federal Environmental Agency (4 MS List, status January 2015) and of the Drinking Water Ordinance as per DIN 50930-6 (2013).
Other materials on request
Material inspection certificates are available for all materials. The relevant documents are stored in our DMS.
Sectors
We provide services to a wide variety of industries including:
Plumbing and Sanitary
Home Appliances
Fire Protection
HVAC (Heating, Ventilation, and Air Conditioning)
Automotive
Agricultural
Fitting and Valves
Food and Beverage
Medical
Electrical and Electronics
Gas
Aerospace
Treatments and finishes
We offer finishing and heat treatment as part of our service.
Surface treatment
- Electroless nickel plating
- Chemical nickel plating
- Silver plating
- Copper plating
- Tin plating
- Anodization
- Passivation
- Galvanization
Heat treatment
- Stress relieving
- Annealing
Drum or rack plating capabilities for larger and delicate parts are possible.
Lead and cadmium free plating services that meet RoHS, ELV, and WEEE requirements.
Surface treatments and heat treatments are carried out by our long-term reliable partners subjected to our own quality system.